2.0heating Furnace for Steel Rolling2.0heating Furnace2.0metallurgical Heating Furnace

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 3 Years
• Model NO.: 3T-200T
• Customized: Customized
• Condition: New
• Power Source: Gas
• Automatic Grade: Automatic
• Type: Sintering Furnace
• Certification: ISO
• Temperature: 1550ºC
• Transport Package: Frame Transport
• Specification: 2.3*12*2.3
• Trademark: 1111
• Origin: China Tangshan City
• HS Code: 8417100000
• Production Capacity: 50set/Month

Product Description

The main body of the gasifier consists of a cover, water jacket, bottom device, inlet box, etc.
The cover is protected. because the interior is made up of refractory and thermal insulating materials cast. The sheet material 20g is chosen for the internal ring of water jacket and for the external Q235-A. Water jacket and steam collector are connected and the upper and the lower parts form a natural soft feed water circulating system, in which soft water firstly comes into the steam collector, and goes down into the water jacket, then produces steam compound after heated and goes up into the steam collector through the up pipe, through the vapor separating device, steam is separated, which can be used as gasification liquid in a gas stove. Only when soft water is stopped and the water in the water jacket is just temporary enough to support the gasifier, can main water be used.        
 The bottom device consists of ratchet and dust plate. The ratchet and grate are fixed on the dust plate. The grate has been studied for years and designed by our factory, which make wind at the bottom of the gasifier even. The two sides of the grate are of the use of getting rid of dust and effectively prevent some phenomena as declination during the running of the gasifier, and reduce resistance for the wind to keep things out of the gasifier, which benefits the purification of the gas. Under the plate there is an axle. When the plate turns, the grate runs at the same time and dust drops into the plate, then small dust knife smash the dregs and the big knife put them out of the plate. The water-sealed packing in the middle of the wind feeding box and the lower part of the plate form a water seal.

Masonry position	Name of the material	Thickness (mm)
Furnace bottom	fireclay brick	204
	light weight fireclay brick=1.0	136
	aluminum silicate fiber board	100
	Total thickness	440
Furnace wall	low cement castables	200
	light weight fireclay brick=1.0	116
	aluminum silicate fiber board	60
	Total thickness	376
Furnace roof	low cement castables	200
	fiber blanket	40
	Perlite	40
	Total thickness	280